| What is Klarol ? |
Klarol is an oil purifying equipment capable of removing solid, liquid and gaseous contamination from any oil. Klarol can be used in various configurations and applications with machines using hydraulic oils, engine oils, compressor oils, gear oils, transformer oils, turbine oils, transmission oils, industrial oils and synthetic oils.
Depending on the capacity and configuration of your oil tanks, we can customise the Klarol oil cleansing systems to serve your needs.
Removal of solid contaminants upto 1 micron, complete removal of liquid contaminants like diesel and moisture, keep the oil at an unbelievable NAS 5, which is 5 times better than new oil. (New oil is at NAS 10-12). |
| |
| Why should we use it ? |
- Enhanced machine life
- Reduced maintainence costs
- Increase in oil life indefinitely, resulting in no more change of oil
- Increased efficiency of the machine
- Reduced oil leakages
- Reduced waste oil generation
- Less energy consumption
- Klarol serves the social cause - oil is a gift from nature, lets conserve oil
- Quick return on investment
|
| |
| Who should use Klarol ? |
There is a Klarol cleansing system for every lubrication oil purification need. Tell us what your oil consumption is, tell us what the oil tank capacity is and tell us your rate of oil change, we will come up with the best Klarol configuration for you. Some popular Klarol applications are
- Diesel engines
- Injection moulding machines
- Hydraulic press
- Clamping machine
- Hydraulic system of any earth moving vehicle
Check the products page of the website to find out more about which configuration most friendly for you machine. |
| |
| What is the scientific fact upon which Klarol is based? |
| Oil does not wear out mechanically. It can be reused indefinitely as long as it is kept clean. This scientifically proven fact is accepted by chemistry and lubrication experts throughout the world. Check the technology pages to understand more about how it works. |
| |
| Does the colour of the oil have any bearing on its lubricating ability ? |
| None whatsoever. Detergent oil will turn a dark blue-black after it is heated. Non-detergent oil will turn a reddish brown. Most diesel engines will turn oil black in the first few minutes of running time. The only accurate way to determine oil's value or contamination level is through spectrographic analysis. |
| |
| Will the installation of Klarol have any adverse effect on the machine ? |
| Definitely not. It must be remembered that the Klarol is installed as an accessory to the engine oil pressure system. This means that the Klarol does not come between the oil pump and any moving part of the engine. If the electric heating element fuse blew or the inlet strainer became blocked for any reason it would only result in the oil becoming gradually contaminated - as it would under normal operating conditions without Klarol - until the problem was corrected. The unit Klarol cannot in any way obstruct the flow of oil to the engines' moving parts. |
| |
| Will the Klarol cause a drop in oil pressure which might affect the engine ? |
| No. The quantity of the oil passing through Klarol is carefully controlled to prevent any drop in the oil pressure that would affect the normal operation of the engine in any way. |
| |
| How will the Klarol affect oil additives and detergents which are contained in new oil ? |
| Klarol does not affect oil additives and detergents in any way. Since the oil is kept constantly clean, there iis little worl for most additives to do. Those that are being used, such as anti-scuffing agents, are replaced when make up oil is added to the engine. |
| |
| Can the Klarol be installed on a new engine before it is broken in ? |
| Yes. The Klarol aids in the break-in period and ultimately contributes to longer life of the engine by removing excessive metal particles that circulate through the engine during this period and are below 40 microns in size. These are not usually trapped by the engine's full flow filters. If the engine comes with special break-in oil, just follow the manufacturer's instructions after installing Klarol. |
| |
To download more information about Klarol - Click here
