Special features of Klarol

• It is always installed in the by-pass line of the hydraulic circuit
• It works at a pressure between 3 kg/cm2 and 10 kg/cm2
• Purified oil coming out of Klarol is at atmospheric pressure and so cannot go up on its own
• One unit of Klarol is required for upto 250 litres, 2 for upto 600 litres, 3 for 1000 litres, 4 for 1500 litres and thererafter every unit of Klarol can take care of 500 litres of oil
• Only 25 litres of oil passes through Klarol in 1 hour

Mobile System

A set of 4 or 6 Klarols with 20 LPM pump motor, 149 µ strainer and no return solenoid valve in suction line, 10 µ filter assembly in excess line, a preheater with thermostatic control, a 30 litre tank for collection of purified oil with a secondary pump motor of 10 LPM to send back the purified oil to desired overhead tank, a control panel with safety relays and sensors, all mounted on a trolley with valves and hoses. This machine can be connected to some hydraulic tank and run continuously for a certain period to bring the oil at certain NAS value. Then it can be shifted to come other hydraulic machine. It can also be used to restore back the dirty and rejected oil kept in barrels.

Permanent Installation

Klarol oil cleaning system can be installed permanently and independantly on every hydraulic machine for best results. It will clean the oil every moment the machine is in operation. Oil will be kept at a NAS value of 6. There are three options available for permanent installation.